The DeskLamp is a small USB module with one or more outputs for LEDs, which can be controlled by DMXControl 2.12.2 and 3.0.2+. It can be used to implement both monochromatic and RGB lamps.
Variants
The DeskLamp is available in different versions. It supports both a monochromatic and an RGB mounting mode. There are also two housing types, a small and a large version. They differ in that a USB socket can also be soldered onto the board in the large version and can therefore be used as a USB adapter. In this case, however, only the monochrome mode is available, as only one power supply line is available for the connected USB device. The monochrome and RGB variants differ only in the number of assembled channels and the installed firmware.
Technical data
- Supply voltage: Supply via USB
- PC connection: USB 2.0
- Dimensions of board H180804: 38.5mm x 17mm
- Dimensions of board H201005: 45mm x 22mm
Assembly instructions
- Soldering iron with approx. 25 watts or adjustable
- Lead-free solder 0.75 mm Sn95% flux 3.5%
Disclaimer
DMXControl-Projects e.V. is not liable for any damage or loss of data of any kind. The association assumes no liability for the topicality, correctness, completeness or quality of the information and content provided. Liability claims against the author or the DMXControl-Projects e.V. association relating to material or non-material damage caused by the use or non-use of the information provided or by the use of incorrect or incomplete information are fundamentally excluded.