Nodle R4S

Nodle nodle u1

After our Nodle U1 USB-DMX interface was a great success, there was always the demand for a ready to use Nodle interface. After a long planning period (since about 2015) and intensive preliminary work, the time has come: We present the Nodle Ready for Show (short Nodle R4S). It is the same reliable companion in everyday show life as the Nodle U1, but there is no need to solder the interface. Unbox it and and use it.

The Nodle R4S is now available in our webshop.

Technical Characteristics

  • Supply Voltage: Power supply via USB
  • PC Connection: USB 2.0
  • DMX-IN: 512 Channels
  • DMX-OUT: 512 Channels
  • Aktive Interface: Internal buffer for all DMX values
  • Galvanic Isolation: Yes (between DMX area and controller area)
  • Customizable DMX timing parameters

Supported Opperating Systems

The Nodle R4S interface was successfully tested on the following opperating systems:

  • Windows 7 (32bit and 64bit)
  • Windows 8 (32bit and 64bit)
  • Windows 8.1 (32bit and 64bit)
  • Windows 10 (32bit and 64bit)
  • Debian 8

Supported Programs

  • DMXControl 2
  • DMXControl 3
  • PC_Dimmer

Download

In the following you will find the updated DMXControl 3 output plugin and the Nodle USB DLL. These must replace the ones in the installation directory of DMXControl 3. For DMXControl 2 and PC_Dimmer only the Nodle USB DLL has to be updated. In the following you can also download the configuration tool for the Nodle R4S, with which you can flash the firmware and test the interface.

VersionsVersion NumberRelease Date
Firmware  1.00 01.08.2018
Nodle R4S Config-Tool  1.0.0.0 01.08.2018
Nodle DLL  1.0.0.5
02.07.2019
Output Plugin DMXControl 3.2  1.1.0.1 01.08.2019
Output Plugin DMXControl 3.1.3  1.1.0.0 01.08.2019
Output Plugin PC_Dimmer  1.0.0.1 28.11.2014